BQCDT - ILUX BED COMP MAHOG, 215
- MSDS: BQCDT
- Manufacturer: INTERNATIONAL PAINT CO INC
- Product Name: ILUX BED COMP MAHOG, 215
- National Stock Number: 8010-00N035127
Product Identification
Product ID:ILUX BED COMP MAHOG, 215
MSDS Date:09/03/1991
FSC:8010
NIIN:00N035127
MSDS Number: BQCDT
Responsible Party
UNION, NJ 07083-5704
US
Emergency Phone: 201-686-1300
Info Phone: 201-686-1300
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
NAPHTHA, MEDIUM ALIPHATIC; (MINERAL SPIRITS, EXEMPT
CAS: 64742-88-7
Fraction By Weight: 1-5%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:CAN CAUSE IRRITATION W/REDNESS,
TEARING & BLURRED VISION. SKIN:IRRITATING. MAY RESULT IN
DERMATITIS. INHAL:IRRITATION OF RESPIRATORY TRACT. HEADACHE,
DIZZINESS & UNCONSCIOUSNESS. INGEST:GI IRRITA TION, NAUSEA,
VOMITING, DIARRHEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN & RESPIRATORY CONDITIONS.
First Aid
First Aid:EYES:FLUSH IMMED W/COPIOUS QUANTITIES OF WATER FOR AT LST 15
MINS. GET MED ATTN IMMED. SKIN:REMOVE CONTAM CLTHG, WASH W/PLENTY
OF SOAP & WATER. LAUNDER CLOTHES BEFORE REUSE. INHAL:REMOVE TO
FRESH AIR. GIVE ARTF RESP IF NEEDED. GET MED ATTN. INGEST:CALL MD
IMMED TO DETERMINE WHETHER OR NOT TO INDUCE VOMITING.
Fire Fighting
Flash Point Method:COC
Flash Point:110F,43C
Lower Limits:1%
Extinguishing Media:FOAM, "ALCOHOL" FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SMOTHER FLAMES W/ONE OF EXTING MEDIA. WATER MAY BE USED TO COOL
UNOPENED CNTNRS, BUT MUST NOT BE (SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP W/ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STORAGE OF LIQUIDS W/NFPA CLASS GIVEN BY OSHA.
Other Precautions:AVOID BREATHING DUST OR CHIPS FROM SANDING OR
BLASTING SURFACES COATED W/THIS PRODUCT. RECOMMEND GROUNDING &
BONDING OF CONTAINERS WHEN TRANSFERRING LIQUIDS & POWDERS TO AVOID
STATIC CHARGE BUILD UP.
Exposure Controls
Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT AREAS,
USE NIOSH/MSHA APPRVD RESP I/A/W 29CFR1910.134 TO (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGS BELOW LIMS SPECIFIED & TO REMOVE DECOMP(SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOGG W/FULL LGTH FCSHLD
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE & WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:USED AS EXTING MEDIA. TAKE CARE TO PVNT SPREAD OF
BURNING LIQ W/WATER. CLSD CNTNRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. RESP PROT:REMOVE COMBINATION OF PARTICULATES & VAPS.
VENT:P RODS DURING WELDING/FLAME CUTTING ON SURFS COATED W/THIS
PRODUCT.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:4 (WT)
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO*2, VARIOUS HYDROCARBON
FRAGMENTS.
Disposal
Waste Disposal Methods:DISPOSE I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.